Where to Find Documentation
This is an attempt to bring together links that are specifically relevant to Open GB as opposed to GB2 and GB3, etc. from among all of the various repositories that re:3D uses for its information.
HELP: support@re3d.org
PHONE: 512-730-0033
FORUM: right here
CENTRAL DOC INDEX: https://www.wevolver.com/re.3d/opengb/main/description/
GETTING STARTED: https://www.wevolver.com/re.3d/opengb/getting-started/description/
COMPLETE CAD ASSEMBLY: https://cad.onshape.com/documents/137d7ca1367dd8a1a3bcd71c/w/f1b83de5e1daf52c90b5d8b4/e/7e63651211b68d6e8f8eb842
SOFTWARE DOCS: http://opengb.readthedocs.org
CONTROLLER BOARD INFO: Azteeg X3 PRO
CONTROLLER BOARD SCHEMATIC: http://files.panucatt.com/datasheets/x3pro_wiring.pdf
Getting the most from your Gigabot
- Dimensional Accuracy
- Getting a good print
- Printing from Gigabot's Viki controller
- Tuning hot-end temperature controller
- Changing the filament spool
- Changing filament mid-print
- Gigabot maintenance schedule
- Stopping and starting mid-print
Additional resources
- Known problems
- What types of plastic can I print on my Gigabot?
- File:Know your filament.xlsx
- More information on software for 3D printing: Software Toolchain (reprap.org))
- Post processing and finishing your prints
- Science and Research in 3D Printing
Simplify3D Print Workflow Support
Rep-Rap Print Troubleshooting Pictorial Guide
Simplify3D Print Quality Troubleshooting
DIY Gigahacking: 4 Knob Bed Leveling Kit
OGB Specs:
- Printer Type: FFF
- Build Volume Width in cm: 55.4
- Build Volume Depth in cm: 46.3
- Build Volume Height in cm: 65.4
- Accuracy / Minimum Layer Height in Microns: 60-100 microns
- Max Hot-End Temperature: 350° C
- Max Heated Bed Temperature: 100° C
- Max Ambient Temperature: 40° C
-
links are not woking.... wiki is not wrking.
0
Please sign in to leave a comment.
Comments
1 comment