3rd Round Test Print (Hi Def)
This print test was done in High Resolution mode. Much Slower than the Standard Res in the Second print but seriously, these pictures just don't do the print quality justice. My iPhone camera really can't capture the detail to the level that this printer supplies. Totally absolutely amazing!!!
I've included a ruler to give some scale to pictures and help convey just how sharp the printing is.
re:3D is still working with me to diagnose why my heated bed isn't heating, which is the primary reason why the bottom of the ctrlV_3D_test (the square with the different objects) and the 3DBency (the tug boat) are slightly warped. Heating the bed is expected to resolve these issues.
-
That is looking great!! What layer height are you using?
0 -
I used the Open GB profile for Simplify3D that you gave me, the only change being that I disabled the bed heating due to the problem with it. This was set to "Highest Resolution - No Raft"
Looks like layer height was 0.1510 mm if I read that correctly...
0
Please sign in to leave a comment.
Comments
2 comments