Shawn Fitzpatrick
- Total activity 193
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 13
- Subscriptions 66
Posts
Recent activity by Shawn Fitzpatrick Sort by recent activity-
solved
-
OGB +Cura
One of my long-term beefs with Simplify3D is its insistance on NOT printing anything if it detects that a segment is less than the nozzle size. Cura reportedly doesn't do this but instead simply gi...
-
E3D Volcano Hot End
Anyone testing the E3D Volcano Hot Ends on a Gigabot of any kind, OBG, or otherwise?
-
Repetier-Server Settings
The latest Repetier-Server version which includes a Raspberry PI image, which makes deploying it quite simple.Here is what I have come up with for settings for the OGB thus far. Any input or correc...
-
Where to Find Documentation
This is an attempt to bring together links that are specifically relevant to Open GB as opposed to GB2 and GB3, etc. from among all of the various repositories that re:3D uses for its information.H...
-
Thoughts on what is causing this?
About two months ago, the cold end extruders on my OGB failed, causing them to drop the hot ends, which then crashed with my prints and caused the belts to skip, etc. I'm wondering is perhaps eithe...
-
Parameters for .8 mm Nozzles
I've been doing some testing with PLA and .8 mm nozzles to see how the quality compares, as it seems like we could have some pretty significant speed increases on models that don't require high pre...
-
Extruder Block Left Rev7
I'm really glad to so that re:3D has moved the pivot point for the tensioner up so that the fulcrum is closer to the load. This also reduces the distance between the fulcrum and the springs which s...
-
Simplify3D - Version 3.1.0 - Adds re:3D Gigabot 2 XL and Gigabot 3 XL Support
https://www.simplify3d.com/software/release-notes/Sounds like they have added a lot of improvements.It will be interesting to see if the "Continued improvements to the slicing engine for automatica...
-
Calibrating XYZ
Calibrating XYZ Correct calibration is important for accurately sized prints. This is not that important if you are just going to be printing artistic or fun things. It is important if your prints ...