Gigabot Printing Profiles (Simplify3D, Slic3r, Cura)


Simplify3D is our preferred slicing and printer hosting program as it best handles the large print jobs that Gigabot users make on a daily basis with highly customizable settings. The factory file functionality also enables us to better support and troubleshoot with customers. We recommend this if you are looking for a robust and reliable software workflow.

Your Gigabot is fully compatible with open source programming tools supported by the RepRap community. We have included profiles for Slic3r and Cura if you do not wish to use Simplify3D.

Simplify3D Software

Purchase, download, and install Simplify3D.

Simplify3D FFF Profiles

Current installations of Simplify3D will not have the most updated printing profiles for your Gigabot, so the following steps outline how to import a new profile:

Download and install the Simplify3D profile below for your printer. Note that each profile is specific to a certain Gigabot model (GB3, GB3 XL, etc.).

Importing Instructions: 

  1. Click on the profile link for your Gigabot model: GB3/GB3+ | GB3+ (Mondo) | Terabot | Open GB | GB2 | GBX
  2. In the new window, right-click on the link at the top of the page and choose "save link as." This will download the file to your computer.
  3. Open Simplify3D.
  4. Go to File -> Import .fff Profile.
  5. Choose the updated .fff configuration file for your machine.

This will add it to the list of profiles you can choose from in Simplify3D. Before starting a new print, click on the "Edit Process Settings" button on the left side of the page. It will open the print settings, and you will need to select the newly-imported profile from the drop-down list.

Removing Profiles: 

The default Gigabot profile that Simplify3D comes with is incorrect and needs to be removed. We also suggest you remove all profiles except for the ones specific to your machine to prevent errors in printing with the wrong settings. Here are the instructions to remove profiles:

    1. Open Simplify3D.
    2. Click "Edit Process Settings"
    3. Click on the "Remove" button in the upper right of the box
    4. Select the profiles you want to delete
    5. Press "OK"

GB3+ with firmware 4.2.0 and above

Base Profile - Used for single material prints

Support Profile (Using separate material for support structures)

Polycarbonate (PC) Profile

GB3+ with Mondo Hot End 0.8mm Nozzle

Terabot V1 with firmware 4.2.0 and above

Terabot V3


GB3 and GB3+ with firmware 4.1.3 to 4.1.5

Open GB


Gigabot X Reg

Gigabot X XL

Gigabot X XLT

Terabot X

More Resources


If you are not using Simplify3D to prepare your 3D model for printing, you can use Slic3r. Slic3r takes a 3D model (usually a .stl file) and turns it into G-code. G-code is the instructions for the 3D printer to create the part. A more detailed explanation of G-code can be found on the RepRap wiki.


  1. Download and install Slic3r.
  2. Read the complete Slic3r manual
  3. Download Slic3r settings for your Gigabot to your local computer:
  4. Open Slic3r and go to File -> Preferences -> Mode -> Expert.
  5. Click OK and follow the prompt to restart Slic3r.
  6. Once you have restarted Slic3r, go to File -> Load Configuration.
  7. Choose the Gigabot_Slic3r_config.ini ‎configuration file you saved earlier. 


Cura is a free slicer software that is commonly used in the 3D printing industry. While we primarily focus on using Simplify3D, we have created a few Cura profiles and a step-by-step guide for how to use them.

Questions or concerns? Reach out to our support team at or open a support ticket

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.