re:3D - Agent
- Total activity 220
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 113
Activity overview
Latest activity by re:3D - Agent-
re:3D - Agent created an article,
Klipper Firmware Installation
Last Updated: 9/4/2023 for Klipper Stack v0.5.0 Klipper Installation Instructions Setting up Mainboard While powered on, before you put the new SD card in: Press and hold the ‘erase’ button ...
-
re:3D - Agent created an article,
Common Errors and Troubleshooting
Why does Klipper report errors? I lost my print! Klipper has been engineered to automatically workaround many transient problems. For example, it automatically detects communication errors and wi...
-
re:3D - Agent created an article,
Procedure for PID Tuning Gigabot 4 and Terabot 4 Dual Extruder Hot Ends
re:3D’s Gigabot 4 and Terabot 4 printers come standard with dual extruders having hot ends heated by 65W cartridge heaters. Temperatures are monitored by thermocouples, and this provides closed-lo...
-
re:3D - Agent commented,
Hi Carlos, The max temp error indicates an open circuit on the thermocouple. Can you say if it is on the right or left extruder? You may need a new thermocouple. Can you please send pictures to sup...
-
re:3D - Agent created an article,
Series II Metal Extruder
Introducing the new Series II Metal Extruder from re:3D Inc. You will find our new extruder to be superior with an extremely strong one piece machined body, easy to operate filament tensioner arm a...
-
re:3D - Agent commented,
There has been some work done on converting Gigabot to allow for 1.75mm filament. Changes that will need to be made: - Filament detection units for 1.75mm filament - Right and Left - 1.75mm Filamen...
-
re:3D - Agent created an article,
Bed Adhesion Issues
Poor bed adhesion can cause a print to dislodge from the print bed during printing, resulting in print failure. Many factors can cause poor bed adhesion, and sometimes poor bed adhesion is a result...
-
re:3D - Agent created an article,
Material Testing Procedure for Pellet Extrusion
This article is divided into these main sections: Overview Choosing Gigabot X Materials Extrusion Testing Print Optimization Testing For a video that summarizes this material testing procedure, s...
-
re:3D - Agent created an article,
Contaminated Materials
Gigabot X's pellet extruder can print with a variety of recycled regrind feedstocks. However, contaminants in the feedstock can cause a variety of issues when printing, including: Inconsistent ext...
-
re:3D - Agent created an article,
Purge Materials
What Are Purge Materials? Purge materials are materials that are specially formulated to clean the internal geometry of extruders and/or aid in the transition between two print materials. Purge mat...