Daniel Calderon
- Total activity 15
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 5
Activity overview
Latest activity by Daniel Calderon-
Daniel Calderon commented,
I have been using PLA only for my prints. What is the difference between PrintinZ skin and the BuildTak? Will a full size PLA flat-bottom print (600mm x 600mm)just pop off the build plate if I use...
-
Daniel Calderon commented,
Hi Mike, The filament detector was it. I readjusted the screws on the switch and that fixed it. Thanks Daniel
-
Daniel Calderon created a post,
Change Filament Glitch
Hi, I'm looking for some help troubleshooting an issue. My gigabot seems to be stuck in the "change filament" sequence because after the filament is changed (it heats up, retracts, insert filament,...
-
Daniel Calderon commented,
Hey Matthew, Should the spray be applied directly to the metal build plate? I'm thinking of trying this out. Thanks Daniel
-
Daniel Calderon created a post,
x-axis stepper motor problem
Hi, The x-axis stepper motor on my gigabot3+ has crapped out (I think). The motor just moves back and forth in tiny increments instead of the way it should be moving. I've uploaded a video here so ...
-
Daniel Calderon commented,
Mike, Sure, as soon as I get to the office I'll send it over. Here is a picture of the comm from yesterday when the error happened.
-
Daniel Calderon commented,
Daniel A, well, I ran the file again and the same thing happened. I think I found the actual problem: The thick bottom layers of the raft cause the print head to move very slow, which in turn was c...
-
Daniel Calderon commented,
Thought I'd add that it hasn't happened before.
-
Daniel Calderon created a post,
Gigabot going off-course
Hi, Gigabot 3+ PLA filament Printing via USB from Simplify3D, medium sized object. While printing the raft in what should be consistently left and right extrusions, the Gigabot is driving itself o...
-
Daniel Calderon created a post,
My First Print GB3+
I've spent the last few days putting together the final bolts and screws on my gigabot 3+ kit build. I finally got to turn it on and sent through a file first using slic3r and then pronterface. I...