Gigabot Build Volume: Difference Between Single and Dual Extrusion

If you are printing with a single extruder (not doing a dual extrusion print), you have the same build volume regardless of whether your Gigabot is a single or dual extruder model.

If you are printing with dual extrusion, the X-axis length decreases because the right extruder can't reach the left side of the bed.

When printing with a single extrusion, your X-axis will measure 590mm. When printing with dual extrusion, it's shorter by the distance between the nozzles -- about 55mm.

Questions or concerns? Reach out to our support team at support@re:3D.org or open a support ticket.