Check 24V Power Supply Output

To check if your power supply is properly outputting 24VDC, please follow these steps:

***Use extreme caution during this procedure to not touch anything in the electrical box that is not advised as there will be 120VAC of power in the system***

  1. Plug the Gigabot in and turn on the power
  2. Open the electrical box with a large flat head screwdriver
  3. Use a multimeter to find the the DC voltage across the power supply output terminals according to the following photo:
  4. Record the measured voltage, then close and latch the electrical box with the screwdriver


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.